Enhanced PHP File Manager

⬆️ Go Up (..)

📊 Server Information

Server:

Apache

System:

Linux 3.10.0-1160.119.1.el7.x86_64

PHP Version:

8.0.30

User:

behniwal

Directory:

/home/behniwal/public_html/projectimage/blogs/ALFA_DATA/alfasymlink/root/usr/share/snmp/mibs

Free Space:

14.99 GB

🔧 Quick Actions

✏️ Editing: HOST-RESOURCES-MIB.txt

HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2,
Integer32, Counter32, Gauge32, TimeTicks  FROM SNMPv2-SMI

TEXTUAL-CONVENTION, DisplayString,
TruthValue, DateAndTime, AutonomousType   FROM SNMPv2-TC

MODULE-COMPLIANCE, OBJECT-GROUP           FROM SNMPv2-CONF

InterfaceIndexOrZero                      FROM IF-MIB;

hostResourcesMibModule MODULE-IDENTITY
   LAST-UPDATED "200003060000Z"    -- 6 March 2000
   ORGANIZATION "IETF Host Resources MIB Working Group"
   CONTACT-INFO
       "Steve Waldbusser
       Postal: Lucent Technologies, Inc.
               1213 Innsbruck Dr.
               Sunnyvale, CA 94089
               USA
       Phone:  650-318-1251
       Fax:    650-318-1633
       Email:  waldbusser@lucent.com

In addition, the Host Resources MIB mailing list is
       dedicated to discussion of this MIB. To join the
       mailing list, send a request message to
       hostmib-request@andrew.cmu.edu. The mailing list
       address is hostmib@andrew.cmu.edu."
   DESCRIPTION
       "This MIB is for use in managing host systems. The term
       `host' is construed to mean any computer that communicates
       with other similar computers attached to the internet and
       that is directly used by one or more human beings. Although
       this MIB does not necessarily apply to devices whose primary
       function is communications services (e.g., terminal servers,
       routers, bridges, monitoring equipment), such relevance is
       not explicitly precluded.  This MIB instruments attributes
       common to all internet hosts including, for example, both
       personal computers and systems that run variants of Unix."

REVISION "200003060000Z"        -- 6 March 2000
   DESCRIPTION
       "Clarifications and bug fixes based on implementation
       experience.  This revision was also reformatted in the SMIv2
       format. The revisions made were:

New RFC document standards:
          Added Copyright notice, updated introduction to SNMP
          Framework, updated references section, added reference to
          RFC 2119, and added a meaningful Security Considerations
          section.

New IANA considerations section for registration of new types

Conversion to new SMIv2 syntax for the following types and
       macros:
           Counter32, Integer32, Gauge32, MODULE-IDENTITY,
           OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
           MODULE-COMPLIANCE, OBJECT-GROUP

Used new Textual Conventions:
           TruthValue, DateAndTime, AutonomousType,
           InterfaceIndexOrZero

Fixed typo in hrPrinterStatus.

Added missing error bits to hrPrinterDetectedErrorState and
       clarified confusion resulting from suggested mappings to
       hrPrinterStatus.

Clarified that size of objects of type
       InternationalDisplayString is number of octets, not number
       of encoded symbols.

Clarified the use of the following objects based on
       implementation experience:
           hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
           hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
           hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
           hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
           and hrSWInstalledDate.

Clarified implementation technique for hrSWInstalledTable.

Used new AUGMENTS clause for hrSWRunPerfTable.

Added Internationalization Considerations section.

This revision published as RFC2790."

REVISION "9910202200Z"    -- 20 October, 1999
   DESCRIPTION
       "The original version of this MIB, published as
       RFC1514."
   ::= { hrMIBAdminInfo 1 }

host     OBJECT IDENTIFIER ::= { mib-2 25 }

hrSystem        OBJECT IDENTIFIER ::= { host 1 }
hrStorage       OBJECT IDENTIFIER ::= { host 2 }
hrDevice        OBJECT IDENTIFIER ::= { host 3 }
hrSWRun         OBJECT IDENTIFIER ::= { host 4 }
hrSWRunPerf     OBJECT IDENTIFIER ::= { host 5 }
hrSWInstalled   OBJECT IDENTIFIER ::= { host 6 }
hrMIBAdminInfo  OBJECT IDENTIFIER ::= { host 7 }

-- textual conventions

KBytes ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Storage size, expressed in units of 1024 bytes."
    SYNTAX Integer32 (0..2147483647)

ProductID ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This textual convention is intended to identify the

manufacturer, model, and version of a specific
        hardware or software product.  It is suggested that
        these OBJECT IDENTIFIERs are allocated such that all
        products from a particular manufacturer are registered
        under a subtree distinct to that manufacturer.  In
        addition, all versions of a product should be
        registered under a subtree distinct to that product.
        With this strategy, a management station may uniquely
        determine the manufacturer and/or model of a product
        whose productID is unknown to the management station.
        Objects of this type may be useful for inventory
        purposes or for automatically detecting
        incompatibilities or version mismatches between
        various hardware and software components on a system.

For example, the product ID for the ACME 4860 66MHz
        clock doubled processor might be:
        enterprises.acme.acmeProcessors.a4860DX2.MHz66

A software product might be registered as:
        enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
        "
    SYNTAX OBJECT IDENTIFIER

-- unknownProduct will be used for any unknown ProductID
-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }

InternationalDisplayString ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "This data type is used to model textual information
        in some character set.  A network management station
        should use a local algorithm to determine which
        character set is in use and how it should be
        displayed.  Note that this character set may be
        encoded with more than one octet per symbol, but will
        most often be NVT ASCII. When a size clause is
        specified for an object of this type, the size refers
        to the length in octets, not the number of symbols."
    SYNTAX OCTET STRING

-- The Host Resources System Group

hrSystemUptime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The amount of time since this host was last
        initialized.  Note that this is different from
        sysUpTime in the SNMPv2-MIB [RFC1907] because
        sysUpTime is the uptime of the network management
        portion of the system."
    ::= { hrSystem 1 }

hrSystemDate OBJECT-TYPE
    SYNTAX     DateAndTime
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The host's notion of the local date and time of day."
    ::= { hrSystem 2 }

hrSystemInitialLoadDevice OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The index of the hrDeviceEntry for the device from
        which this host is configured to load its initial
        operating system configuration (i.e., which operating
        system code and/or boot parameters).

Note that writing to this object just changes the
        configuration that will be used the next time the
        operating system is loaded and does not actually cause
        the reload to occur."
    ::= { hrSystem 3 }

hrSystemInitialLoadParameters OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE (0..128))
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object contains the parameters (e.g. a pathname
        and parameter) supplied to the load device when
        requesting the initial operating system configuration
        from that device.

Note that writing to this object just changes the
     configuration that will be used the next time the
     operating system is loaded and does not actually cause
     the reload to occur."
    ::= { hrSystem 4 }

hrSystemNumUsers OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of user sessions for which this host is
        storing state information.  A session is a collection
        of processes requiring a single act of user
        authentication and possibly subject to collective job
        control."
    ::= { hrSystem 5 }

hrSystemProcesses OBJECT-TYPE
    SYNTAX     Gauge32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of process contexts currently loaded or
        running on this system."
    ::= { hrSystem 6 }

hrSystemMaxProcesses OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The maximum number of process contexts this system
        can support.  If there is no fixed maximum, the value
        should be zero.  On systems that have a fixed maximum,
        this object can help diagnose failures that occur when
        this maximum is reached."
    ::= { hrSystem 7 }

-- The Host Resources Storage Group

-- Registration point for storage types, for use with hrStorageType.
-- These are defined in the HOST-RESOURCES-TYPES module.
hrStorageTypes          OBJECT IDENTIFIER ::= { hrStorage 1 }

hrMemorySize OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The amount of physical read-write main memory,
        typically RAM, contained by the host."
    ::= { hrStorage 2 }

hrStorageTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of logical storage areas on
        the host.

An entry shall be placed in the storage table for each
        logical area of storage that is allocated and has
        fixed resource limits.  The amount of storage
        represented in an entity is the amount actually usable
        by the requesting entity, and excludes loss due to
        formatting or file system reference information.

These entries are associated with logical storage
        areas, as might be seen by an application, rather than
        physical storage entities which are typically seen by
        an operating system.  Storage such as tapes and
        floppies without file systems on them are typically
        not allocated in chunks by the operating system to
        requesting applications, and therefore shouldn't
        appear in this table.  Examples of valid storage for
        this table include disk partitions, file systems, ram
        (for some architectures this is further segmented into
        regular memory, extended memory, and so on), backing
        store for virtual memory (`swap space').

This table is intended to be a useful diagnostic for
        `out of memory' and `out of buffers' types of
        failures.  In addition, it can be a useful performance
        monitoring tool for tracking memory, disk, or buffer
        usage."
    ::= { hrStorage 3 }

hrStorageEntry OBJECT-TYPE
    SYNTAX     HrStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one logical storage area on
        the host.  As an example, an instance of the
        hrStorageType object might be named hrStorageType.3"
    INDEX { hrStorageIndex }
    ::= { hrStorageTable 1 }

HrStorageEntry ::= SEQUENCE {
        hrStorageIndex               Integer32,
        hrStorageType                AutonomousType,
        hrStorageDescr               DisplayString,
        hrStorageAllocationUnits     Integer32,
        hrStorageSize                Integer32,
        hrStorageUsed                Integer32,
        hrStorageAllocationFailures  Counter32
    }

hrStorageIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each logical storage area
        contained by the host."
    ::= { hrStorageEntry 1 }

hrStorageType OBJECT-TYPE
    SYNTAX     AutonomousType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of storage represented by this entry."
    ::= { hrStorageEntry 2 }

hrStorageDescr OBJECT-TYPE
    SYNTAX     DisplayString
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A description of the type and instance of the storage
        described by this entry."
    ::= { hrStorageEntry 3 }

hrStorageAllocationUnits OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    UNITS      "Bytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The size, in bytes, of the data objects allocated
        from this pool.  If this entry is monitoring sectors,
        blocks, buffers, or packets, for example, this number
        will commonly be greater than one.  Otherwise this
        number will typically be one."
    ::= { hrStorageEntry 4 }

hrStorageSize OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The size of the storage represented by this entry, in
        units of hrStorageAllocationUnits. This object is
        writable to allow remote configuration of the size of
        the storage area in those cases where such an
        operation makes sense and is possible on the
        underlying system. For example, the amount of main
        memory allocated to a buffer pool might be modified or
        the amount of disk space allocated to virtual memory
        might be modified."
    ::= { hrStorageEntry 5 }

hrStorageUsed OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The amount of the storage represented by this entry
        that is allocated, in units of
        hrStorageAllocationUnits."
    ::= { hrStorageEntry 6 }

hrStorageAllocationFailures OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of requests for storage represented by
        this entry that could not be honored due to not enough
        storage.  It should be noted that as this object has a
        SYNTAX of Counter32, that it does not have a defined
        initial value.  However, it is recommended that this
        object be initialized to zero, even though management
        stations must not depend on such an initialization."
    ::= { hrStorageEntry 7 }

-- The Host Resources Device Group
--
-- The device group is useful for identifying and diagnosing the
-- devices on a system.  The hrDeviceTable contains common
-- information for any type of device.  In addition, some devices
-- have device-specific tables for more detailed information.  More
-- such tables may be defined in the future for other device types.

-- Registration point for device types, for use with hrDeviceType.

-- These are defined in the HOST-RESOURCES-TYPES module.
hrDeviceTypes             OBJECT IDENTIFIER ::= { hrDevice 1 }

hrDeviceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrDeviceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of devices contained by the
        host."
    ::= { hrDevice 2 }

hrDeviceEntry OBJECT-TYPE
    SYNTAX     HrDeviceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one device contained by the
        host.  As an example, an instance of the hrDeviceType
        object might be named hrDeviceType.3"
    INDEX { hrDeviceIndex }
    ::= { hrDeviceTable 1 }

HrDeviceEntry ::= SEQUENCE {
        hrDeviceIndex           Integer32,
        hrDeviceType            AutonomousType,
        hrDeviceDescr           DisplayString,
        hrDeviceID              ProductID,
        hrDeviceStatus          INTEGER,
        hrDeviceErrors          Counter32
    }

hrDeviceIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each device contained by the host.
        The value for each device must remain constant at
        least from one re-initialization of the agent to the
        next re-initialization."
    ::= { hrDeviceEntry 1 }

hrDeviceType OBJECT-TYPE
    SYNTAX     AutonomousType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "An indication of the type of device.

If this value is
        `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
        exists in the hrProcessorTable which corresponds to
        this device.

If this value is
        `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
        exists in the hrNetworkTable which corresponds to this
        device.

If this value is
        `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
        exists in the hrPrinterTable which corresponds to this
        device.

If this value is
        `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
        entry exists in the hrDiskStorageTable which
        corresponds to this device."
    ::= { hrDeviceEntry 2 }

hrDeviceDescr OBJECT-TYPE
    SYNTAX     DisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A textual description of this device, including the
        device's manufacturer and revision, and optionally,
        its serial number."
    ::= { hrDeviceEntry 3 }

hrDeviceID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID for this device."
    ::= { hrDeviceEntry 4 }

hrDeviceStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   unknown(1),
                   running(2),
                   warning(3),
                   testing(4),
                   down(5)

}
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current operational state of the device described
        by this row of the table.  A value unknown(1)
        indicates that the current state of the device is
        unknown.  running(2) indicates that the device is up
        and running and that no unusual error conditions are
        known.  The warning(3) state indicates that agent has
        been informed of an unusual error condition by the
        operational software (e.g., a disk device driver) but
        that the device is still 'operational'.  An example
        would be a high number of soft errors on a disk.  A
        value of testing(4), indicates that the device is not
        available for use because it is in the testing state.
        The state of down(5) is used only when the agent has
        been informed that the device is not available for any
        use."
    ::= { hrDeviceEntry 5 }

hrDeviceErrors OBJECT-TYPE
    SYNTAX     Counter32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of errors detected on this device.  It
        should be noted that as this object has a SYNTAX of
        Counter32, that it does not have a defined initial
        value.  However, it is recommended that this object be
        initialized to zero, even though management stations
        must not depend on such an initialization."
    ::= { hrDeviceEntry 6 }

hrProcessorTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrProcessorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of processors contained by the
        host.

Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceProcessor'."
    ::= { hrDevice 3 }

hrProcessorEntry OBJECT-TYPE
    SYNTAX     HrProcessorEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one processor contained by
        the host.  The hrDeviceIndex in the index represents
        the entry in the hrDeviceTable that corresponds to the
        hrProcessorEntry.

As an example of how objects in this table are named,
        an instance of the hrProcessorFrwID object might be
        named hrProcessorFrwID.3"
    INDEX { hrDeviceIndex }
    ::= { hrProcessorTable 1 }

HrProcessorEntry ::= SEQUENCE {
        hrProcessorFrwID            ProductID,
        hrProcessorLoad             Integer32
    }

hrProcessorFrwID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID of the firmware associated with the
        processor."
    ::= { hrProcessorEntry 1 }

hrProcessorLoad OBJECT-TYPE
    SYNTAX     Integer32 (0..100)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The average, over the last minute, of the percentage
        of time that this processor was not idle.
        Implementations may approximate this one minute
        smoothing period if necessary."
    ::= { hrProcessorEntry 2 }

hrNetworkTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrNetworkEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of network devices contained
        by the host.

Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceNetwork'."
    ::= { hrDevice 4 }

hrNetworkEntry OBJECT-TYPE
    SYNTAX     HrNetworkEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one network device contained
        by the host.  The hrDeviceIndex in the index
        represents the entry in the hrDeviceTable that
        corresponds to the hrNetworkEntry.

As an example of how objects in this table are named,
        an instance of the hrNetworkIfIndex object might be
        named hrNetworkIfIndex.3"
    INDEX { hrDeviceIndex }
    ::= { hrNetworkTable 1 }

HrNetworkEntry ::= SEQUENCE {
        hrNetworkIfIndex    InterfaceIndexOrZero
    }

hrNetworkIfIndex OBJECT-TYPE
    SYNTAX     InterfaceIndexOrZero
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of ifIndex which corresponds to this
        network device. If this device is not represented in
        the ifTable, then this value shall be zero."
    ::= { hrNetworkEntry 1 }

hrPrinterTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrPrinterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of printers local to the host.

Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDevicePrinter'."
    ::= { hrDevice 5 }

hrPrinterEntry OBJECT-TYPE
    SYNTAX     HrPrinterEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one printer local to the
        host.  The hrDeviceIndex in the index represents the
        entry in the hrDeviceTable that corresponds to the
        hrPrinterEntry.

As an example of how objects in this table are named,
        an instance of the hrPrinterStatus object might be
        named hrPrinterStatus.3"
    INDEX { hrDeviceIndex }
    ::= { hrPrinterTable 1 }

HrPrinterEntry ::= SEQUENCE {
        hrPrinterStatus             INTEGER,
        hrPrinterDetectedErrorState OCTET STRING
    }

hrPrinterStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   other(1),
                   unknown(2),
                   idle(3),
                   printing(4),
                   warmup(5)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The current status of this printer device."
    ::= { hrPrinterEntry 1 }

hrPrinterDetectedErrorState OBJECT-TYPE
    SYNTAX     OCTET STRING
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This object represents any error conditions detected
        by the printer.  The error conditions are encoded as
        bits in an octet string, with the following
        definitions:

Condition         Bit #

lowPaper              0

noPaper               1
             lowToner              2
             noToner               3
             doorOpen              4
             jammed                5
             offline               6
             serviceRequested      7
             inputTrayMissing      8
             outputTrayMissing     9
             markerSupplyMissing  10
             outputNearFull       11
             outputFull           12
             inputTrayEmpty       13
             overduePreventMaint  14

Bits are numbered starting with the most significant
        bit of the first byte being bit 0, the least
        significant bit of the first byte being bit 7, the
        most significant bit of the second byte being bit 8,
        and so on.  A one bit encodes that the condition was
        detected, while a zero bit encodes that the condition
        was not detected.

This object is useful for alerting an operator to
        specific warning or error conditions that may occur,
        especially those requiring human intervention."
    ::= { hrPrinterEntry 2 }

hrDiskStorageTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrDiskStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of long-term storage devices
        contained by the host.  In particular, disk devices
        accessed remotely over a network are not included
        here.

Note that this table is potentially sparse: a
        (conceptual) entry exists only if the correspondent
        value of the hrDeviceType object is
        `hrDeviceDiskStorage'."
    ::= { hrDevice 6 }

hrDiskStorageEntry OBJECT-TYPE
    SYNTAX     HrDiskStorageEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one long-term storage device
        contained by the host.  The hrDeviceIndex in the index
        represents the entry in the hrDeviceTable that
        corresponds to the hrDiskStorageEntry. As an example,
        an instance of the hrDiskStorageCapacity object might
        be named hrDiskStorageCapacity.3"
    INDEX { hrDeviceIndex }
    ::= { hrDiskStorageTable 1 }

HrDiskStorageEntry ::= SEQUENCE {
        hrDiskStorageAccess         INTEGER,
        hrDiskStorageMedia          INTEGER,
        hrDiskStorageRemoveble      TruthValue,
        hrDiskStorageCapacity       KBytes
    }

hrDiskStorageAccess OBJECT-TYPE
    SYNTAX     INTEGER {
                   readWrite(1),
                   readOnly(2)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "An indication if this long-term storage device is
        readable and writable or only readable.  This should
        reflect the media type, any write-protect mechanism,
        and any device configuration that affects the entire
        device."
    ::= { hrDiskStorageEntry 1 }

hrDiskStorageMedia OBJECT-TYPE
    SYNTAX     INTEGER {
                   other(1),
                   unknown(2),
                   hardDisk(3),
                   floppyDisk(4),
                   opticalDiskROM(5),
                   opticalDiskWORM(6),     -- Write Once Read Many
                   opticalDiskRW(7),
                   ramDisk(8)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "An indication of the type of media used in this long-
        term storage device."
    ::= { hrDiskStorageEntry 2 }

hrDiskStorageRemoveble OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "Denotes whether or not the disk media may be removed
        from the drive."
    ::= { hrDiskStorageEntry 3 }

hrDiskStorageCapacity OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total size for this long-term storage device. If
        the media is removable and is currently removed, this
        value should be zero."
    ::= { hrDiskStorageEntry 4 }

hrPartitionTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrPartitionEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of partitions for long-term
        storage devices contained by the host.  In particular,
        partitions accessed remotely over a network are not
        included here."
    ::= { hrDevice 7 }

hrPartitionEntry OBJECT-TYPE
    SYNTAX     HrPartitionEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one partition.  The
        hrDeviceIndex in the index represents the entry in the
        hrDeviceTable that corresponds to the
        hrPartitionEntry.

As an example of how objects in this table are named,
        an instance of the hrPartitionSize object might be
        named hrPartitionSize.3.1"
    INDEX { hrDeviceIndex, hrPartitionIndex }
    ::= { hrPartitionTable 1 }

HrPartitionEntry ::= SEQUENCE {
        hrPartitionIndex                Integer32,
        hrPartitionLabel                InternationalDisplayString,
        hrPartitionID                   OCTET STRING,
        hrPartitionSize                 KBytes,
        hrPartitionFSIndex              Integer32
    }

hrPartitionIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each partition on this long-term
        storage device.  The value for each long-term storage
        device must remain constant at least from one re-
        initialization of the agent to the next re-
        initialization."
    ::= { hrPartitionEntry 1 }

hrPartitionLabel OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE (0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A textual description of this partition."
    ::= { hrPartitionEntry 2 }

hrPartitionID OBJECT-TYPE
    SYNTAX     OCTET STRING
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A descriptor which uniquely represents this partition
        to the responsible operating system.  On some systems,
        this might take on a binary representation."
    ::= { hrPartitionEntry 3 }

hrPartitionSize OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The size of this partition."
    ::= { hrPartitionEntry 4 }

hrPartitionFSIndex OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The index of the file system mounted on this
        partition.  If no file system is mounted on this
        partition, then this value shall be zero.  Note that
        multiple partitions may point to one file system,
        denoting that that file system resides on those
        partitions.  Multiple file systems may not reside on
        one partition."
    ::= { hrPartitionEntry 5 }

-- The File System Table

-- Registration point for popular File System types,
-- for use with hrFSType. These are defined in the
-- HOST-RESOURCES-TYPES module.
hrFSTypes               OBJECT IDENTIFIER ::= { hrDevice 9 }

hrFSTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrFSEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of file systems local to this
        host or remotely mounted from a file server.  File
        systems that are in only one user's environment on a
        multi-user system will not be included in this table."
    ::= { hrDevice 8 }

hrFSEntry OBJECT-TYPE
    SYNTAX     HrFSEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one file system local to
        this host or remotely mounted from a file server.
        File systems that are in only one user's environment
        on a multi-user system will not be included in this
        table.

As an example of how objects in this table are named,
        an instance of the hrFSMountPoint object might be
        named hrFSMountPoint.3"
    INDEX { hrFSIndex }
    ::= { hrFSTable 1 }

HrFSEntry ::= SEQUENCE {
        hrFSIndex                   Integer32,
        hrFSMountPoint              InternationalDisplayString,
        hrFSRemoteMountPoint        InternationalDisplayString,
        hrFSType                    AutonomousType,
        hrFSAccess                  INTEGER,
        hrFSBootable                TruthValue,
        hrFSStorageIndex            Integer32,
        hrFSLastFullBackupDate      DateAndTime,
        hrFSLastPartialBackupDate   DateAndTime
    }

hrFSIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each file system local to this
        host.  The value for each file system must remain
        constant at least from one re-initialization of the
        agent to the next re-initialization."
    ::= { hrFSEntry 1 }

hrFSMountPoint OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The path name of the root of this file system."
    ::= { hrFSEntry 2 }

hrFSRemoteMountPoint OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A description of the name and/or address of the
        server that this file system is mounted from.  This
        may also include parameters such as the mount point on
        the remote file system.  If this is not a remote file
        system, this string should have a length of zero."
    ::= { hrFSEntry 3 }

hrFSType OBJECT-TYPE
    SYNTAX     AutonomousType
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of this object identifies the type of this
        file system."
    ::= { hrFSEntry 4 }

hrFSAccess OBJECT-TYPE
    SYNTAX     INTEGER {
                   readWrite(1),
                   readOnly(2)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "An indication if this file system is logically
        configured by the operating system to be readable and
        writable or only readable.  This does not represent
        any local access-control policy, except one that is
        applied to the file system as a whole."
    ::= { hrFSEntry 5 }

hrFSBootable OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A flag indicating whether this file system is
        bootable."
    ::= { hrFSEntry 6 }

hrFSStorageIndex OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The index of the hrStorageEntry that represents
        information about this file system.  If there is no
        such information available, then this value shall be
        zero.  The relevant storage entry will be useful in
        tracking the percent usage of this file system and
        diagnosing errors that may occur when it runs out of
        space."
    ::= { hrFSEntry 7 }

hrFSLastFullBackupDate OBJECT-TYPE
    SYNTAX     DateAndTime
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The last date at which this complete file system was

copied to another storage device for backup.  This
        information is useful for ensuring that backups are
        being performed regularly.

If this information is not known, then this variable
        shall have the value corresponding to January 1, year
        0000, 00:00:00.0, which is encoded as
        (hex)'00 00 01 01 00 00 00 00'."
    ::= { hrFSEntry 8 }

hrFSLastPartialBackupDate OBJECT-TYPE
    SYNTAX     DateAndTime
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The last date at which a portion of this file system
        was copied to another storage device for backup.  This
        information is useful for ensuring that backups are
        being performed regularly.

-- The Host Resources Running Software Group
--
-- The hrSWRunTable contains an entry for each distinct piece of
-- software that is running or loaded into physical or virtual
-- memory in preparation for running.  This includes the host's
-- operating system, device drivers, and applications.

hrSWOSIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of the hrSWRunIndex for the hrSWRunEntry
        that represents the primary operating system running
        on this host.  This object is useful for quickly and
        uniquely identifying that primary operating system."
    ::= { hrSWRun 1 }

hrSWRunTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrSWRunEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of software running on the
        host."
    ::= { hrSWRun 2 }

hrSWRunEntry OBJECT-TYPE
    SYNTAX     HrSWRunEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for one piece of software
        running on the host Note that because the installed
        software table only contains information for software
        stored locally on this host, not every piece of
        running software will be found in the installed
        software table.  This is true of software that was
        loaded and run from a non-local source, such as a
        network-mounted file system.

As an example of how objects in this table are named,
        an instance of the hrSWRunName object might be named
        hrSWRunName.1287"
    INDEX { hrSWRunIndex }
    ::= { hrSWRunTable 1 }

HrSWRunEntry ::= SEQUENCE {
        hrSWRunIndex       Integer32,
        hrSWRunName        InternationalDisplayString,
        hrSWRunID          ProductID,
        hrSWRunPath        InternationalDisplayString,
        hrSWRunParameters  InternationalDisplayString,
        hrSWRunType        INTEGER,
        hrSWRunStatus      INTEGER
    }

hrSWRunIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each piece of software running on
        the host.  Wherever possible, this should be the
        system's native, unique identification number."
    ::= { hrSWRunEntry 1 }

hrSWRunName OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A textual description of this running piece of
        software, including the manufacturer, revision,  and
        the name by which it is commonly known.  If this
        software was installed locally, this should be the
        same string as used in the corresponding
        hrSWInstalledName."
    ::= { hrSWRunEntry 2 }

hrSWRunID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID of this running piece of software."
    ::= { hrSWRunEntry 3 }

hrSWRunPath OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A description of the location on long-term storage
        (e.g. a disk drive) from which this software was
        loaded."
    ::= { hrSWRunEntry 4 }

hrSWRunParameters OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE(0..128))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A description of the parameters supplied to this
        software when it was initially loaded."
    ::= { hrSWRunEntry 5 }

hrSWRunType OBJECT-TYPE
    SYNTAX     INTEGER {
                   unknown(1),
                   operatingSystem(2),
                   deviceDriver(3),
                   application(4)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of this software."
    ::= { hrSWRunEntry 6 }

hrSWRunStatus OBJECT-TYPE
    SYNTAX     INTEGER {
                   running(1),
                   runnable(2),    -- waiting for resource
                                   -- (i.e., CPU, memory, IO)
                   notRunnable(3), -- loaded but waiting for event
                   invalid(4)      -- not loaded
               }
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The status of this running piece of software.
        Setting this value to invalid(4) shall cause this
        software to stop running and to be unloaded. Sets to
        other values are not valid."
    ::= { hrSWRunEntry 7 }

-- The Host Resources Running Software Performance Group
--
-- The hrSWRunPerfTable contains an entry corresponding to
-- each entry in the hrSWRunTable.

hrSWRunPerfTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrSWRunPerfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of running software
        performance metrics."
    ::= { hrSWRunPerf 1 }

hrSWRunPerfEntry OBJECT-TYPE
    SYNTAX     HrSWRunPerfEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry containing software performance
        metrics.  As an example, an instance of the
        hrSWRunPerfCPU object might be named
        hrSWRunPerfCPU.1287"
    AUGMENTS { hrSWRunEntry }  -- This table augments information in
                               -- the hrSWRunTable.
    ::= { hrSWRunPerfTable 1 }

HrSWRunPerfEntry ::= SEQUENCE {
        hrSWRunPerfCPU          Integer32,
        hrSWRunPerfMem          KBytes
}

hrSWRunPerfCPU OBJECT-TYPE
    SYNTAX     Integer32 (0..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The number of centi-seconds of the total system's CPU
        resources consumed by this process.  Note that on a
        multi-processor system, this value may increment by
        more than one centi-second in one centi-second of real
        (wall clock) time."
    ::= { hrSWRunPerfEntry 1 }

hrSWRunPerfMem OBJECT-TYPE
    SYNTAX     KBytes
    UNITS      "KBytes"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The total amount of real system memory allocated to
        this process."
    ::= { hrSWRunPerfEntry 2 }

-- The Host Resources Installed Software Group
--
-- The hrSWInstalledTable contains an entry for each piece
-- of software installed in long-term storage (e.g. a disk
-- drive) locally on this host.  Note that this does not
-- include software loadable remotely from a network
-- server.
--
-- Different implementations may track software in varying
-- ways. For example, while some implementations may track
-- executable files as distinct pieces of software, other
-- implementations may use other strategies such as keeping
-- track of software "packages" (e.g., related groups of files)
-- or keeping track of system or application "patches".
--
-- This table is useful for identifying and inventorying
-- software on a host and for diagnosing incompatibility
-- and version mismatch problems between various pieces
-- of hardware and software.

hrSWInstalledLastChange OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of sysUpTime when an entry in the
        hrSWInstalledTable was last added, renamed, or
        deleted.  Because this table is likely to contain many
        entries, polling of this object allows a management
        station to determine when re-downloading of the table
        might be useful."
    ::= { hrSWInstalled 1 }

hrSWInstalledLastUpdateTime OBJECT-TYPE
    SYNTAX     TimeTicks
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The value of sysUpTime when the hrSWInstalledTable
        was last completely updated.  Because caching of this
        data will be a popular implementation strategy,
        retrieval of this object allows a management station
        to obtain a guarantee that no data in this table is
        older than the indicated time."
    ::= { hrSWInstalled 2 }

hrSWInstalledTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF HrSWInstalledEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The (conceptual) table of software installed on this
        host."
    ::= { hrSWInstalled 3 }

hrSWInstalledEntry OBJECT-TYPE
    SYNTAX     HrSWInstalledEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "A (conceptual) entry for a piece of software
        installed on this host.

As an example of how objects in this table are named,
        an instance of the hrSWInstalledName object might be
        named hrSWInstalledName.96"
    INDEX { hrSWInstalledIndex }
    ::= { hrSWInstalledTable 1 }

HrSWInstalledEntry ::= SEQUENCE {
        hrSWInstalledIndex       Integer32,
        hrSWInstalledName        InternationalDisplayString,
        hrSWInstalledID          ProductID,
        hrSWInstalledType        INTEGER,
        hrSWInstalledDate        DateAndTime
}

hrSWInstalledIndex OBJECT-TYPE
    SYNTAX     Integer32 (1..2147483647)
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A unique value for each piece of software installed
        on the host.  This value shall be in the range from 1
        to the number of pieces of software installed on the
        host."
    ::= { hrSWInstalledEntry 1 }

hrSWInstalledName OBJECT-TYPE
    SYNTAX     InternationalDisplayString (SIZE (0..64))
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "A textual description of this installed piece of
        software, including the manufacturer, revision, the
        name by which it is commonly known, and optionally,
        its serial number."
    ::= { hrSWInstalledEntry 2 }

hrSWInstalledID OBJECT-TYPE
    SYNTAX     ProductID
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The product ID of this installed piece of software."
    ::= { hrSWInstalledEntry 3 }

hrSWInstalledType OBJECT-TYPE
    SYNTAX     INTEGER {
                   unknown(1),
                   operatingSystem(2),
                   deviceDriver(3),
                   application(4)
               }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The type of this software."
    ::= { hrSWInstalledEntry 4 }

hrSWInstalledDate OBJECT-TYPE
    SYNTAX     DateAndTime
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The last-modification date of this application as it
        would appear in a directory listing.

-- Conformance information

hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
hrMIBGroups      OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }

-- Compliance Statements
hrMIBCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The requirements for conformance to the Host Resources MIB."
    MODULE -- this module
      MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
                         hrDeviceGroup }

OBJECT hrSystemDate
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

OBJECT hrSystemInitialLoadDevice
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

OBJECT hrSystemInitialLoadParameters
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

OBJECT hrStorageSize
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

OBJECT hrFSLastFullBackupDate
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

OBJECT hrFSLastPartialBackupDate
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

GROUP hrSWRunGroup
          DESCRIPTION
              "The Running Software Group. Implementation
              of this group is mandatory only when the
              hrSWRunPerfGroup is implemented."

OBJECT hrSWRunStatus
          MIN-ACCESS read-only
          DESCRIPTION
              "Write access is not required."

GROUP hrSWRunPerfGroup
          DESCRIPTION
              "The Running Software Performance Group.
              Implementation of this group is at the discretion
              of the implementor."

GROUP hrSWInstalledGroup
          DESCRIPTION
              "The Installed Software Group.
              Implementation of this group is at the discretion
              of the implementor."
    ::= { hrMIBCompliances 1 }

hrSystemGroup OBJECT-GROUP
        OBJECTS {
            hrSystemUptime, hrSystemDate,
            hrSystemInitialLoadDevice,
            hrSystemInitialLoadParameters,
            hrSystemNumUsers, hrSystemProcesses,
            hrSystemMaxProcesses
        }
        STATUS current
        DESCRIPTION
            "The Host Resources System Group."
        ::= { hrMIBGroups 1 }

hrStorageGroup OBJECT-GROUP
        OBJECTS {
            hrMemorySize, hrStorageIndex, hrStorageType,
            hrStorageDescr, hrStorageAllocationUnits,
            hrStorageSize, hrStorageUsed,
            hrStorageAllocationFailures
        }
        STATUS current
        DESCRIPTION
            "The Host Resources Storage Group."
        ::= { hrMIBGroups 2 }

hrDeviceGroup OBJECT-GROUP
        OBJECTS {
            hrDeviceIndex, hrDeviceType, hrDeviceDescr,
            hrDeviceID, hrDeviceStatus, hrDeviceErrors,
            hrProcessorFrwID, hrProcessorLoad,
            hrNetworkIfIndex, hrPrinterStatus,
            hrPrinterDetectedErrorState,
            hrDiskStorageAccess, hrDiskStorageMedia,
            hrDiskStorageRemoveble, hrDiskStorageCapacity,
            hrPartitionIndex, hrPartitionLabel,
            hrPartitionID, hrPartitionSize,
            hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
            hrFSRemoteMountPoint, hrFSType, hrFSAccess,
            hrFSBootable, hrFSStorageIndex,
            hrFSLastFullBackupDate,
            hrFSLastPartialBackupDate
        }
        STATUS current
        DESCRIPTION
            "The Host Resources Device Group."
        ::= { hrMIBGroups 3 }

hrSWRunGroup OBJECT-GROUP
        OBJECTS {
            hrSWOSIndex, hrSWRunIndex, hrSWRunName,
            hrSWRunID, hrSWRunPath, hrSWRunParameters,
            hrSWRunType, hrSWRunStatus
        }
        STATUS current
        DESCRIPTION
            "The Host Resources Running Software Group."
        ::= { hrMIBGroups 4 }

hrSWRunPerfGroup OBJECT-GROUP
        OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
        STATUS current
        DESCRIPTION
            "The Host Resources Running Software
            Performance Group."
        ::= { hrMIBGroups 5 }

hrSWInstalledGroup OBJECT-GROUP
        OBJECTS {
            hrSWInstalledLastChange,
            hrSWInstalledLastUpdateTime,
            hrSWInstalledIndex, hrSWInstalledName,
            hrSWInstalledID, hrSWInstalledType,
            hrSWInstalledDate
        }
        STATUS current
        DESCRIPTION
            "The Host Resources Installed Software Group."
        ::= { hrMIBGroups 6 }

END

❌ Cancel

🗂️ Enhanced PHP File Manager

📊 Server Information

🔧 Quick Actions

✏️ Editing: HOST-RESOURCES-MIB.txt

📤 Upload File

📁 Create Folder

📄 Create File

✏️ Rename Item

🗑️ Delete Confirmation